First select a product category. Here you can choose between linear encoders, angle encoders or length gauges.
Select the accuracy of the incremental length gauge that meets your requirements. You can choose between two accuracy classes, SPECTO for ±1 µm or METRO for ±0.5 µm.
The position detection can be incremental or absolute. The incremental measuring method provides a relative position as well as direction of movement, which requires an assignment to a reference point (starting point) at the beginning of the measurement. This is done by homing the axis. The absolute measuring method provides concrete position information at any axis position. A reference run at the beginning of the measurement is not necessary.
At this point you can select the type of bolt actuation. You can choose between two variants, spring-driven or pneumatic. With spring-driven length gauges, the built-in spring extends the measuring bolt into the measuring position and builds up the measuring force. The measuring bolt is extended in the rest position. On length gauges with pneumatic bolt actuation, the bolt extends when compressed air is applied. When the compressed air connection is vented, the built-in spring retracts the measuring bolt.
Discover our series
SPECTO
Operating instructions (multilingual)
Product information
Mounting instructions
Pin-assignment
METRO
LIK Series
LIKgo | LIKselect | LIK 41 | LIK 2x | MI measuring standard
LIKgo - operating instructions
LIKselect - operating instructions
LIK 41 - operating instructions
LIK Series - operating instructions
Kit L Series
Kit L2 | L4
Kit L Series - operating instructions
LIA Series
LIA 20 | 21
LIA Series - operating instructions
Vacuum products
LIK vacuum series - operating instructions
Measuring standards
MI measuring standard - operating instructions
MV & MT measuring standard - data sheet
LAK
LAK - operating instructions
Kit LA
Kit LA - operating instructions
RIK 4
RIK 4 - operating instructions
Kit R4
Kit R4 - operating instructions
RIK 4 vacuum series - operating instructions
Graduated disks
Graduated disks - product information
Accessories
ADJUSTMENT TOOL | ABSOFLEX | SCM | NPA
ADJUSTMENT TOOL - operating instructions
ABSOFLEX - operating instructions
SCM - operating instructions
NPA NUMERIK PWT adapter - operating instructions
Line Driver
OL7272 - data sheet
OL2068 - data sheet