First select a product category. Here you can choose between linear encoders, angle encoders or length gauges.
Select the accuracy of the incremental length gauge that meets your requirements. You can choose between two accuracy classes, SPECTO for ±1 µm or METRO for ±0.5 µm.
The position detection can be incremental or absolute. The incremental measuring method provides a relative position as well as direction of movement, which requires an assignment to a reference point (starting point) at the beginning of the measurement. This is done by homing the axis. The absolute measuring method provides concrete position information at any axis position. A reference run at the beginning of the measurement is not necessary.
At this point you can select the type of bolt actuation. You can choose between two variants, spring-driven or pneumatic. With spring-driven length gauges, the built-in spring extends the measuring bolt into the measuring position and builds up the measuring force. The measuring bolt is extended in the rest position. On length gauges with pneumatic bolt actuation, the bolt extends when compressed air is applied. When the compressed air connection is vented, the built-in spring retracts the measuring bolt.
Discover our series
NUMERIK JENA GmbH Im Semmicht 4 07751 Jena Deutschland
Management Board Ralf Zgodzaj, Karsten Lang
Telephone+49 3641 4728-0
Telefax+49 3641 4728-202
E-Mailinfo(at)numerikjena.de
Register Court Amtsgericht Jena
Register Number HRB 207324
VAT ID Number DE812543307
NUMERIK JENA GmbH cannot guarantee the correctness, accuracy, or completeness of this content and is therefore not liable for any type of loss or damage that may directly or indirectly result from the use of the online content of this website. Likewise, NUMERIK JENA GmbH is not liable for the content of websites of other operators that visitors of this website can reach through links thereon. The providers of these non-NUMERIK JENA GmbH websites are solely responsible for their content. Copyright and trademarks, all texts, illustrations, graphs, animations, videos, and other content on this web site, as well as their layout, are protected by copyright law and other laws. Duplication, modification, or use of the abovementioned content in other electronic or printed publications without prior consent of NUMERIK JENA GmbH is prohibited. All trademarks are protected by trademark law unless otherwise indicated. The patents and brands presented on this web site are the intellectual property of NUMERIK JENA GmbH.
We use e-mails for fast communication. These e-mails are not signed and can be altered by third parties. Binding agreements are sent by NUMERIK JENA GmbH in the form of letters, scanned letters, or faxes and are signed in accordance with the applicable NUMERIK JENA GmbH signature policy.
